Recently purchase two 5 gal AR350 Solvent Based Acrylic Wet look Concrete sealer and paver sealer. Followed the instructions as stated for preparing the surface and applying this sealer. I used the spray and roll method and the final finished looks great. This is a great product and worth the money spent.
Review by Valaine4 months ago
Technical support was fantastic, they were there the several times i called, answered all my questions throughout the application,and the SX5000 WB, went on as expected, i used a 2 gal pump sprayer, it dried natural looking to the pavers i used it on, now it is just seeing how long it lasts.
Review by Linkan4 months ago
These guys are knowledgeable, accessible, and responsive. Hard to find that in a company these days. The product (SX 5000WB) went on as advertised and the only thing left to determine is how long it will last on CMU split face walls in the hot Southern California climate. If it lasts the 5 plus years as advertised, I wont go anywhere else. It's a pleasure to do business with this company.
Review by Kiajah4 months ago
I purchased 5 gallon of Armor WL 550 Matte Wet Look Enhancer Sealer for newly installed paver.
Great product. Finished product meet my expectation.
Great customer service
Review by Humprey5 months ago
I purchased Armor AR350 Wet Look/Satan Gloss Acrylic Sealer (ultra low VOC) to seal and brighten up my 20 year old faded out paver stone patio and exposed aggregate concrete sidewalk. I applied two coats as per instructions and am extremely satisfied with the results.The paver stones and concrete look glossy WET, new and attractive now. I used a 4 inch wide paint brush to apply the first coat to make sure the sealer penetrated the spaces between the pavers and then a sponge roller to apply the second. The benefits, suggested applications and technical information provided by Foundation Armor was very helpful and "spot on" accurate! Because of the great results I plan to use only this product in the future. (Oh yes, about the fume smell...No Problem... it is not that bad. It goes away after the sealer dries). I highly recommend it! It is a winner! Sincerely, Dan G.
Review by Tannike2 years ago
Great advice for our sand stones that were weathering through all seasons in Denver, CO. We got exactly what we needed. We will be purchasing more of that treatment as well as something to cover our patio! Highly recommend !!!
Review by Aria2 years ago
I purchased a 5 gallon pail of Armor SX5000 on a Friday and it arrived the following Tuesday. It was applied on a new concrete drive after allowing to cure. It went on fairly easy using a roller. The concrete seemed to suck this stuff in. After 36 hours we had a torrential downpour and the water beaded up like you wouldn't believe. The 1 pail was enough to do an 18x20 square ft. driveway plus a 3x10 sidewalk.Unfortunately I missed a section of the drive and used what was left to put a second coat on another section. But in the rainstorm, it was easy to see what was coated and what wasn't and I will be getting more to finish the job.
Review by Guntis2 years ago
I used UTN60 to coat the concrete floors of our shop and storage room more than a year ago. I'll be using it again on my two garage floors. It holds up well to heavy traffic, and it's relatively easy to apply if you follow the directions. Any questions are helpfully answered by their customer service.
Review by Asifau2 years ago
Here in MIAMI we have lots of rain and lots of mold. After 30 years of pressure washing every six months I had enough and treat all my cement with S2000. It was hard but roughly 2200 sqft of application, it appears my pressure washing is over. Thanks Foundation Armor
Review by Salsy2 years ago
I would have given a five star rating except for one thing. I used a paint roller for my first coat on new paver bricks with sand joints. The roller picked up the sand from the joint and put it on the new brick. I had to go back and scrape off the clumps of sand on the brick before a second coat. I would suggest using a pump sprayer to coat new sand joints and avoid using a paint roller.
Review by MackeyCollection Scharder2 years ago
I am a flooring contractor and have used foundation armor for multiple jobs. Ordering is easy and the product always comes on time. The results speak for themselves
Review by Jima2 years ago
I had a leak on a new home with a basement. The leak was coming at the cold joint between the footing and a 13 foot high retaining wall. Eric was 99 % certain their HPI kit would do the job.
It rained hard for days and the leak was gone. I had no idea before talking to them of how the leak would get fixed. With so many products on the market that do not do the job and so much "expert advice" that is wrong I was worried. Foundation Amor people know their products and what they can do.
I have used their concrete sealers in the past and they also do what they are proposed to do.
Review by Frijos2 years ago
I am extremely happy with the sealer I purchased from Foundation Armor. I used AX25 on concrete roof tiles. The color is rejuvenated and water beads on the surface of the tiles. Foundation Armors' website was easy to use and provided all the technical information I needed. Time will tell how happy I am ultimately, after one winter so far so good. I was looking for a sealer that didn't just lay on top of the surface and the siloxane infused sealer seemed to be what I was looking for.
Review by Yasik2 years ago
I used Foundation Armor to seal and help waterproof my basement floor. It did everything they said it would do. I am so glad I bought this product.
Review by CroninP2 years ago
This is a great product. I had used AR-350 Satin finish on my pool pavers three years ago and it sealed well, but I was never satisfied with the sheen. I read about AX25 that was designed for pool side paver sealing with a high gloss wet look. Applied it over the AR-350 and it took about half of what I expected. Left a glorious wet look sheen and really popped out the subtle shades in the pavers. Looks fantastic. By the way, I hand painted the edges next the pool cages and around the coping paver and nap rolled the rest.
Review by Ayanna Recinos2 years ago
I applied the concrete sealer exactly as the instructions said. It looked good for approx 2-3 months, then it started turning white and releasing from the stamped concrete. It's been about 9 months since I applied it and it looks terrible now. This is the worst sealer I have ever used on my pool deck. I wasted a lot of money ( 10 gal ) on this product expecting it to last longer then the previous product I used, which was about 2 years. I guess I fell for the "natural silicone" in it rather then the synthetic! I now have to restrip the pool deck and redcoat with another product!!!!! Do not use in direct sunlight because it won't hold up.
To follow up on foundation armor's reply: I have never used a water based sealer--- nor would I. The previous sealer was H&C clear 23. Xylene based. The deck was heavily pressure washed and clean/dry. The temp was in the 70's and no rain for at least 2 weeks after application. 2 even coats were rolled on 24 hours apart, with shark grip added to them. I did everything by the manufacturer's instructions and it did not last 6 months!
Review by BornToShop2 years ago
First I cleaned both the concrete block walls and the concrete floor with Muriatic acid. The Muriatic acid drew out a bunch more inflorescence that I could not even see when I started cleaning. Next I neutralized the acid with an ammonia water solution. I wanted everything as clean as possible before I put the epoxy coating onto the surface. The epoxy mixed real easy. Went on great. I put two coats on quickly as per the directions. There was a little inflorescence on the block when I cleaned it. When I was done the walls and floors had a nice sheen to them. Great product. Only issue is that as with most every time I buy paint I ended up with a lot more product than I needed based on the recommendations. However, I am definitely a better to much than too little guy.
Review by Staceygrimes2 years ago
Excellent product and customer support. I sealed our driveway which had never been pressure washed or sealed, took two coats as I was told but looks new again and beads the water. Will use again when the time comes.
Review by KariKanne2 years ago
On the recommendation of the Foundation Armor staff I applied their SC 25 product to several large poured concrete driveway, parking areas and sidewalks at our home. The product is very easy to apply with a hand pump sprayer and it looks great when done. Water beads up on the surface after application and I look forward to it staying cleaner in our damp Florida climate.
Review by Datev Bantayan2 years ago
We poured 3600 ft.² of new concrete in our back yard and replaced our front driveway. Used foundation armor and could not be happier. Penetrated excellent is water repellent and definitely makes sweeping the snow and ice off a lot easier Since we do not use ice melt on the new concrete. Will be a forever customer
Review by Rannah2 years ago
Happy with results. Out two coats, does what is says.
Review by AUDelta Derrow2 years ago
Product works great, after using it once you understand how easy it is to use. So many ways to create a great looking concrete. Thanks for the great service. Keith and Leslie
Review by Doralyn2 years ago
I have use this sealer for a few years now it really holds its gloss and the staff are very well trained to answer any questions I would recommend this product to anyone wanting a gloss wet look finish.
Review by MultiReefa Sathiyaseelan2 years ago
Product works well. Representative on the 1-800 number was knowledgeable and helpful.
Review by Potria2 years ago
Wide selection of various sealers for pavers. Good explanation for proper selection. Quick shipping.